Find a Bicycle Chain Lube Online
As the bicycle chain turns around the pedal cranks and the gear sprockets, it creates friction, which results in the gradual wear and tear. If you want to limit the amount of deterioration on your sprockets and chain, you should regularly lubricate your chain, once every two weeks. To ensure optimum riding conditions, you need to know what type of bicycle chain oil to use for bicycle maintenance, as detailed below:
Tip: A solvent can be used to clean oily brake rotors
In most cases you will accidentally spray or get lubricant on the bicycle rotors. This can render them useless. However, by using the right tools to clean up the oil you can have it good as new.
If you use a strong solvent or cleaner, make sure that you bed-in the rotors before use as the bedded in pad remnants will also be removed in the cleaning process.
Choice of Bicycle Chain Lube Oil
The use of light oil is ideal for bicycle chains with average to dry and clean riding conditions. Light oil works great for penetrating the chain bushings, which is effective in minimizing the amount of wear between the links.
To properly apply light oil, turn the pedal crank backwards and squeeze oil down the chain rollers. Among the most popular choice of light oil among cyclists include Phil Wood Tenacious Oil as well as Tri-Flow.
If you usually ride in wet conditions rainy days or dirty environments such as dust or mud, it is recommended that you use thick grease or oil on your bicycle chains. Experts recommend thinning out thick grease using a volatile solvent to dilute it and allow the mixture to better penetrate on the chain bearings.
Another option is wax, which is considered as the most ideal type of lubricating agent to use, especially for those who live in extremely dry conditions. For easier application, melt the wax and allow it to penetrate on the chain, letting it dry in place. Over time, the wax will naturally flake off, which means you don't need to degrease it as you normally would with other types of oils - you still need to do it, but not as often.
If you are looking for oil that is easily to apply, use spray lubricants that can be directly sprayed on the chain. Ordinary lubricants such as WD-40 are too thin, which only acts as a degreaser that strops away any lubricants that are applied on the chain. If you don't have anything else and just count with some WD-40 then go ahead and apply it but remember that it's not for daily use, you will need to oil it or grease it with something else as soon as possible.
Did You Know?...
Did you know that oily brake surfaces are a recipe for disaster?
Be very careful not to spill any oil on the disk brake rotors and on the rims: it might contaminate your rotors and rims and it will be extremely hard to remove the oil from them. In some extreme cases you'll even need to replace a brake rotor.
To prevent spilling oil on top of what you shouldn't I recommend applying the oil near the area of the chain-ring (cranks, pedals) and use a rag underneath to prevent spilling such oil or grease.
Buying a Bicycle Chain Lube Online
If you are interested in buying a bicycle chain lube you can buy it in one of these trusted online stores:
Buying Bicycle Chain Lube on eBay.com
|No "bicycle chain lube" (All condition) found on eBay(US)|